Sikaflex®-265
WEATHERING-RESISTANT DIRECT-GLAZING ADHESIVE AND SEALANT WITH ACCELERATION OPTION
TYPICAL PRODUCT DATA (FURTHER VALUES SEE SAFETY DATA SHEET)
Sikaflex®-265 is a 1-component elastic adhesive for bonding and joint sealing in commercial-vehicle glazing applications. Its excellent weathering resistance makes it very suitable for use in exterior joints.
Sikaflex®-265 is compatible with Sika’s blackprimerless bonding process. Sikaflex®-265 can be accelerated with Sika’s Booster system.
▪ Suitable for bonding and sealing
▪ Passes EN45545-2 R1/R7 HL3
▪ Good weathering resistance
▪ Solvent-free
▪ Low odor
Excellent processing and tooling characteristics
Sikaflex®-265 is designed for direct glazing applications in both the OEM and repair markets. Owing to its good tooling properties and enhanced weathering stabilization, the product may be used for exterior joints.
Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-265 on materials prone to stress cracking.
Sikaflex®-265 is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Sikaflex®-265 cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower.
Sikaflex®-265 is generally resistant to fresh water, seawater, diluted acids and diluted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated miner
1.What is the minimum order quantity for your rubber products?
We didn’t set the minimum order quantity,1~10pcs some client has ordered
2.lf we can get sample of rubber product from you?
Of course, you can. Feel free to contact me about it if you need it.
3. Do we need to charge for customizing our own products?And if it is necessary to make tooling?
if we have the same or similar rubber part, at the same time, you satisfy it.
Nell, you don’t need to open tooling.
New rubber part, you will charge tooling according to the cost of tooling.n additionalif the cost of tooling is more than 1000 USD, we willreturn all of them to you in the future when purchasing orderquantity reach certain quantity our company rule.
4. How long you will get sample of rubber part?
Jsually it is up to complexity degree of rubber part. Usually it take 7 to 10work days.
5. How many your company product rubber parts?
it is up to the size of tooling and the quantity of cavity of tooling.lf rubber part is more complicate and much bigger, well maybe justnake few, but if rubber part is small and simple, the quantity is more than 200,000pcs.
6.Silicone part meet environment standard?
Dur silicone part are allhigh grade 100% pure silicone material. We can offer you certification ROHS and $GS, FDA. Many of ourproducts are exported to European and American countries., Such as: Straw, rubber diaphragm, food mechanical rubber, etc.
