Rubber products rubber mats have various shapes of rubber mats, such as rubber rings, PTFE composite mats, transparent rubber mats, air gap mats, non-slip mats, rubber flange mats, sponge mats and hemispherical rubber mats, sealing rings, waterproof mats, Rubber gaskets, half gaskets, anti-vibration pads, etc.
Most rubber products and rubber mats are made of rubber. Of course, rubber is also divided into ethylene propylene rubber, natural (natural) rubber, styrene-butadiene rubber and butyl rubber. Some are also used in industries such as pharmaceutical, electronics, chemical and food industries. So, what is the price of this widely used rubber product rubber mat? What are its advantages?
Advantages of rubber products rubber mat:
1. Rubber pads can be made into various shapes, different hardness, good elasticity and strength, and widely used products.
2. The rubber pad has good high temperature resistance at 200°C or -50°C, and still has elasticity.
3. The dielectric performance of the rubber mat is very good, even if the temperature changes greatly, its insulation performance still exists. the
4. The rubber pad is resistant to ozone and ultraviolet radiation, and is not easy to break after long-term use. the
5. The rubber pad has good functions such as anti-skid, environmental protection, wear resistance, shock resistance, cushioning, fixing, anti-seepage, heat insulation, etc.
In short, rubber products and rubber gaskets have common functions, such as sealing, load bearing, cushioning and shock absorption! It is suitable for environments with low temperature requirements and low pressure. The rubber gasket has high elasticity. Depending on the type of rubber, various design needs can be met.
In fact, during the processing of rubber sealing strips and their rubber products, or during storage and use, due to the combined effects of internal and external factors, the physical, chemical and mechanical properties of rubber sealing strips gradually decrease, or even lose.
The rubber seal is moldy, and this change is called rubber seal aging. (It is characterized by cracking, stickiness, hardening, softening, powdering, discoloration and mildew.) Due to sudden changes in temperature or other environmental factors, the use value of the rubber sealing strip is relatively affected.
Reason: Since there are still about 10% protein and fat in the production process of rubber sealing strips, microorganisms in the air can easily use it as a medium, so mold will grow.
二.Ways to remove mold from rubber seals:
1. It can be treated with benzoic acid (sodium) solution, and the anti-mildew effect is better.
2. Wipe with solvent (84 disinfectants, gasoline, toluene, etc.).
3. High temperature baking removal.
Post time: Aug-18-2023