3m Tape Self-adhesive EPDM Foam/Sponge Rubber Weatherstrip Seal for Auto Door Glass

Short Description:

Car door sealing strip is actually closed cell sponge/foam sealing strip extruded into all kinds of shape by extrusion tooling, Which is resistant weather, anti-ozone, waterproof, dust proof, dirty proof, UV resistant, and excellent flexibility ,durable. at present, the material is mainly EPDM. Car door sealing strip has good sealing performance. Specially designed Vehicle sealed strip can be used on side of car doors,boot,engine,low the win and the sound of vibration, also can be used on the door frame, window, forbid collision in order to make the outside noise low.To install weatherstrip better, you can use double-side adhesive backing.

Send email to us

Product Detail

Common Questions

FAQ

Product Tags

Specification

product detail

1.Superior Flexibility

The sealing strip have a strong elasticity and flexibility Under a long squeeze condition

Can increase the service life of the sealing strip better. Improve the sealing and sound insulation effect of car body.

2.Density

We choose raw material EPDM imported from USA, and excellent manufacturer craft

Small density, can better make sure the effect of sound insulation and waterproof, and good dust resistant

3.Stickiness

3M tape or as your requirement. Use it for long time and not fall off

4.Glossiness

The surface is smooth not rough

The method of installation to car door sealing strip

1. With a neutral detergent to wash away dust and oil in place of installation

2. Tear off the 3M protective file on the back of sealing strip,stick on the right place of frame of car door.

3. Strongly press it after sticking sealing strip.

4. Forbid pulling the sealing strip after sticking, forbid washing car within 3days. Don't open the door of car again and again within 24hour

5. Closing the door after construction is a little tight, don't worry, within 3days, it will recover normal.

6. Pay more attention to in the first 1-2 days,make sure the door is closed, safety first

Installation instructions

1.Wipe the dirt,dust and oil stains off the installation with a dry rag

2.Tear the protective film on the end of the seal to the correct position of the door frame

3.Be sure to press hard after the paste is finished

4.After the paste is finished, it is forbidden to use the hand to pull sealing strip,

It is forbidden to wash the car within 3 days and to open and close door again and again in 24 hours .

Packing and shipment

100meters has one roll, one part is packaged with one plastic bag, then certain quantity of rubber sealing strips are put into carton box.

Carton box insider rubber sealing strips is with packing list detail. Such as, item name, the type number of rubber sealing strips, quantity of rubber sealing strips, gross weight,net weight, dimension of carton box,etc

All of carton box will be put on one non-fumigation pallet, then all carton boxes will be wrapped by film.

We have our own forwarder which has Rich experience in delivery arrangement to optimize the most economic and quickest shipping way, SEA, AIR, DHL, UPS ,FEDEX, TNT , etc.

Previous: High Quality EPDM Car window rubber seal

Next: Square EPDM sponge foam sealing

1.What is the minimum order quantity for your rubber products?

We didn’t set the minimum order quantity,1~10pcs some client has ordered

2.lf we can get sample of rubber product from you?

Of course, you can. Feel free to contact me about it if you need it.

3. Do we need to charge for customizing our own products?And if it is necessary to make tooling?

if we have the same or similar rubber part, at the same time, you satisfy it.
Nell, you don’t need to open tooling.
New rubber part, you will charge tooling according to the cost of tooling.n additionalif the cost of tooling is more than 1000 USD, we willreturn all of them to you in the future when purchasing orderquantity reach certain quantity our company rule.

4. How long you will get sample of rubber part?

Jsually it is up to complexity degree of rubber part. Usually it take 7 to 10work days.

5. How many your company product rubber parts?

it is up to the size of tooling and the quantity of cavity of tooling.lf rubber part is more complicate and much bigger, well maybe justnake few, but if rubber part is small and simple, the quantity is more than 200,000pcs.

6.Silicone part meet environment standard?

Dur silicone part are allhigh grade 100% pure silicone material. We can offer you certification ROHS and $GS, FDA. Many of ourproducts are exported to European and American countries., Such as: Straw, rubber diaphragm, food mechanical rubber, etc.

faqs